SKATES U.S. DRILL BIT EXTENSION KIT
The Dual Drill Bit Extension System consists of:
One (1) Double Ended Dual Drill Bit Extender, with 2 Set Screws (one end for 2.0 mm or 5/64″ and the other for 2.5 mm or 3/32″)
Two (2) Drill Bits – 1 – 2.0 mm and 1 – 2.5 mm
One (1) 2.0 mm (5/64″) Hex Allen “L” Wrench
The Dual Drill Bit Extension System consists of:
One (1) Double Ended Dual Drill Bit Extender, with 2 Set Screws (one end for 2.0 mm or 5/64″ and the other for 2.5 mm or 3/32″)
Two (2) Drill Bits – 1 – 2.0 mm and 1 – 2.5 mm
One (1) 2.0 mm (5/64″) Hex Allen “L” Wrench
The Dual Drill Bit Extension System consists of:
One (1) Double Ended Dual Drill Bit Extender, with 2 Set Screws (one end for 2.0 mm or 5/64″ and the other for 2.5 mm or 3/32″)
Two (2) Drill Bits – 1 – 2.0 mm and 1 – 2.5 mm
One (1) 2.0 mm (5/64″) Hex Allen “L” Wrench
How to use
When mounting ICE Blades on EDEA Skates, it is necessary to drill 5/64″ (2.0mm) pilot holes through the entire FootBed for each screw location in the ball of the foot and 3/32″ (2.5mm) pilot holes in the heel to the void. The Drill Bit Extension provides a convenient solution for drilling pilot holes in the sole and heel of EDEA Skates. It is particularly useful for mounting ICE Blades while the blade is already on the boot with the Temp Screws, preventing any concerns about hitting the drill chuck on the blade.
Follow these steps for proper blade mounting:
Blade mounting holes must be pre-drilled.
Remove the inner sole.
Drill completely through the thickness of the sole using the 2.0mm drill bit for the front sole.
For the heel, use the 2.5mm drill bit and drill to a depth of about 1” or 2.5cm.
Ensure thorough drilling to facilitate the removal of waste material from the sole.
Select the appropriate drill bits:
2.0mm – 5/64” for the Front Sole
2.5mm – 3/32” for the Heel
For a proper and secure mount, use the specially designed EDEA Double Helix screws. These screws will not protrude through the footbed. It's essential to clean the drilled hole shavings from the inside of the sole before replacing the inner sole.
Additional Info
Weight: 0.2 lbs
Dimensions: 2 × 2 × 1 in